Kb-electronics Fittings (KBAC/KBDA Liquid Tight Fittings, 3 x 0.5 User Manual download pdf

“The Right Control for Your Application.” 12095 NW 39 Street, Coral Springs, FL 33065-2516

Telephone: 954-346-4900; Fax: 954-346-3377

KB Electronics, Inc. www.kbelectronics.com

INSTALLATION INSTRUCTIONS

Liquidtight Fittings Kit (Part No. 9526)

(A40147) – Rev. C00 – 5/7/2010 Page 1 of 1

1 Description

Kit Contains (3) ½" and (1) ¾" Liquidtight Fittings. The fittings are designed to provide a liquidtight seal when using cables to wire the

drive. These fittings are suitable for all KB NEMA-4X drives. Table 1 shows the specifications of the fittings. Table 2 shows the drive

models and the fitting size and quantity to use. Figure 1 shows the order in which the fitting parts are assembled. Figure 2 shows the

assembled fitting.

2 Installation Instructions

The sealing washer must be installed on the outside of the enclosure. See Figures 1 and 2. Insert the cable after step 2.4.

2.1 Install the sealing washer onto the fitting’s body (side opposite the collet).

2.2 Insert the fitting’s threaded portion (side opposite the collet) through the enclosure mounting hole.

2.3 Hand tighten the locknut as far as possible.

2.4 Hold the body hex stationary with a wrench. Use another wrench to tighten the locknut to the torque specified in Table 1.

2.5 Insert the cable through the sealing nut, collet, and fitting’s body to the desired length.

2.6 Hand tighten the sealing nut as far as possible.

2.7 Hold the body hex stationary with a wrench. Use another wrench to tighten the sealing nut to the torque specified in Table 1.

3 Cable Removal or Replacement Instructions

To loosen the fitting for cable removal or replacement, use a wrench to hold the body hex stationary. Use another wrench to loosen the

sealing nut. Grip the disconnected cable and pull while turning the cable in the counterclockwise direction.

Table 1 – Fittings Specifications

Cable Diameter Range Tightening Torque

Clearance Hole

Inches mm Locknut Sealing Nut

Liquidtight Fitting

Inches mm Min. Max. Min. Max. in-lbs ft-lbs kg-cm in-lbs ft-lbs kg-cm

½" 0.875 22.2 0.170 0.450 4.3 11.4 80 7 92 80 7 92

¾" 1.068 27.1 0.250 0.485 6.4 12.3 170 14 195 130 11 150

Figure 1 – Assembly Order of Fitting

Figure 2 – Installed Fitting

Cable

Inside of Enclosure

Outside of Enclosure

Sealing Nut

Body Hex

Enclosure Base

Sealing Washer

Locknut

Cable

Table 2 – Drive Model and Fitting Size/Quantity

Fitting

Drive Model

Size Quantity

KBAC-24D ½" 2

KBDA-24D, 24P, 42 ½" 3

½" 2

KBAC-27D, 29, 29 (1P), 45, 48

KBDA-27D, 29, 29 (1P), 45, 48

¾" 1

Cable

Collet

Sealing Nut

Sealing Washer

Body Hex

Enclosure Base

Outside of Enclosure

Cable

Locknut

Inside of Enclosure

KBPC / KBRC / KBPW ½" 2

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

“The Right Control for Your Application.” 12095 NW 39 Street, Coral Springs, FL 33065-2516 Telephone: 954-346-4900; Fax: 954-346-3377 KB Elect

Comments to this Manuals

No comments

Kb-electronics Fittings (KBAC/KBDA Liquid Tight Fittings, 3 x 0.5 User Manual

Browse online or download User Manual for Software Kb-electronics Fittings (KBAC/KBDA Liquid Tight Fittings, 3 x 0.5. KB Electronics Fittings (KBAC/KBDA Liquid Tight Fittings, 3 x 0.5, 1 x 0.75")" User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Software Kb-electronics Fittings (KBAC/KBDA Liquid Tight Fittings, 3 x 0.5