Kb-electronics RFAC-24D CE Approved AC Line Filter, installs insi User Manual download pdf

Description

The RFAC-24 is used with the KBAC-24D Adjustable Frequency Drive to provide RFI (EMI) suppression. It installs easily onto the

KBAC-24D PC board with quick-connect terminals. The KBAC-24D with the RFAC-24 complies with CE Council Directive

39/336/EEC relating to the Class A Industrial Standard.

Specifications

10 Amps AC Maximum - 230 Volts AC - 50/60 Hz

Operating Temperature Range: 0 - 50 ºC

Frequency Range: 150 kHz - 30 MHz

Leakage to Ground (Earth): 2.0 mA at 250 Volts AC - 50 Hz

Installation Instructions

Install the RFAC-24 onto the four quick-connect terminal of the KBAC-24D PC board

(L1A, L1B, L2A, L2B) as described below. See Safety Warning, on page 2 of the

KBAC-24D Installation and Operating Instructions manual (Part No. A40289).

Note: When installing the RFAC-24, the optional On/Off AC Line Switch (Part No. 9482)

cannot be used.

WARNING! Disconnect the main power when installing this product.

This product complies with all CE directives pertinent at the time of manufacture. Contact the Sales Department for detailed

installation and Declaration of Conformity.

oard

erminal Removed

erminal Installed

INSTALLATION INSTRUCTIONS

RFAC-24 Part No. 9507 for Model KBAC-24D

1. To open the front cover of the KBAC-24D,

the four captive panel screws must be

loosened so they are no longer engaged in the

case bottom.

2. Remove the (2) jumper assemblies that

e installed on the L1A & L1B and L2A &

L2B terminals of the KBAC-24D PC

board. Using pliers, gently rock the

female terminals back and fourth

vertically while pulling them

upward. See Figure 1, above.

3. Install the RFAC-24

onto the L1A, L1B, L2A, L2B

terminals of the KBAC-24D.

Wire the ground ring terminal

to the gr

een gr

ound scr

ew located on the

inside enclosure of the KBAC-24D. Note the proper

orientation of the RFAC-24. See Figure 2.

lari

(Ground Wire)

KB ELECTRONICS, INC.

12095 NW 39th Str

eet, Coral Springs, FL 33065-2516 • (954) 346-4900 • Fax (954) 346-3377

Outside Florida Call T

oll Free (800) 221-6570 • E-mail – [email protected]

www

.kbelectr

onics.com

(A42118) – Rev. A – 1/2005

Figure 1 – Jumper Assemblies

Figure 2 – Installation Diagram

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

DescriptionThe RFAC-24 is used with the KBAC-24D Adjustable Frequency Drive to provide RFI (EMI) suppression. It installs easily onto the KBAC-24D PC

Comments to this Manuals

No comments

Kb-electronics RFAC-24D CE Approved AC Line Filter, installs insi User Manual

Browse online or download User Manual for Software Kb-electronics RFAC-24D CE Approved AC Line Filter, installs insi. KB Electronics RFAC-24D CE Approved AC Line Filter, installs inside KBAC/KBDA-24D(Class A) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Software Kb-electronics RFAC-24D CE Approved AC Line Filter, installs insi